SEALERS

Satin Stone

Engineered for profressionals,
installed by anyone

Satin Stone is the latest technology in SEMCO Cross Linking sealers. It interlocks with applied substrates solidifying and creating total surface protection with a density enhancement of up to 85%. Excellent for high traffic commercial and industrial environments, for both interior and exterior use. Available in color finishes or with a non-skid additive, too.

Satin Stone in action…

Features & Benefits

Satin Stone is excellent for interior and exterior use while handling rigorous surface conditions, including high traffic commercial and industrial environments.

RECOMMENDED FOR:

  • Commercial and industrial high traffic areas

  • Concrete and masonry

  • Commercial driveway and garages

  • Tile and natural stone (test small area first)

  • Pool decks and shower floors

  • X-Bond Microcement

  • Withstands industrial and commercial vehicle traffic. ASTM 5155 Abrasion Resistance Test: 0.019% change in thickness after 10,000 rubs.

  • Long lasting sealer for interior and exterior surfaces. ASTM G154 Accelerated Weathering Test: 2,000 hours, no change in weight/density, no discoloration.

  • Resistant to chemicals: can be used in hospitals, laboratories, food preparation areas and automotive facilities. Resistant to 10% acetic acid, 10% hydrogen chloride, ammonium hydroxide, gasoline, hydraulic fluid, brake fluid.

  • ASTM 4541 Pull-off Strength of Coatings Test: 450 PSI , 180% of ASTM required 250 PSI.

Application Instructions

MIXING RATIO: 2 Parts A : 1 Part B
POT LIFE: 35 min

Apply at temperatures from 50°F to 90°F.
Drying time: 1 hour at 72°F.
Cure (50%) time : 72 hours at 72°F.

Airless sprayer
tip size 21, 1,000 PSI

Magic trowel
2 coats minimum

Roller
3/8″ soft woven roller
2 coats minimum

    • HOW : Sweep debris off surface

      PURPOSE : Ensures there is no debris in the sealer

    • HOW : Use Satin Stone (for interior and exterior surfaces)

      PURPOSE : Creates natural satin finish for commercial floors and walls, kitchens, medical and industrial spaces

    • HOW: Mix 2 parts of Part A and 1 part of Part B (included in your product order) with a low speed mixer and an epoxy mixing paddle (at only 200 – 300 RPM for 20 seconds) or by hand, stirring thoroughly, avoid mixing more product than can be applied. Product pot life is up to 35 minutes depending on temperature (MARK TIME ON CONTAINER)

      PURPOSE : Low speed mixture, less air in mix reduces dry time to avoid wasted product. Since product is water-base will not get hard in container

    • HOW: Use airless sprayer with tip size 21 at 850-1,000 PSI. Position the airless sprayer gun at 18” away from the floor

      PURPOSE: Smaller tip size and high pressure can cause a lot overspray. Allows product to lay down evenly on the surface

    • HOW: OPTIONAL: use magic trowel to spread the product or roll product on with a 3/8″ soft woven roller. Do not go back and forth

      PURPOSE : Ensures the finish and color stay consistent.

    • HOW: Minimum of 2 coats is required to ensure 20 mils film thickness in total

      PURPOSE: Ensures long lasting surface protection from industrial and commercial vehicle and foot traffic

Specifications

Back
Forward

COVERAGE

sq ft / gallon, min 2 coats @ 20 mils total thickness

Polished concrete 200 - 250
Stamped concrete 300 - 350
X-Bond Microcemet 250 - 300
Artificial Stone 200 - 250
LVT and VCT 250 - 300
Ceramic 250 - 300
Laminate 250 - 300

PRODUCT DETAILS

Color Part A - milky white, Part B - light amber
Chemical type Polyurethane bybrid
Clean up SEMCO Stone Soap with water
Shelf life 1 year in controlled environment (ambient temperature) of 60°F - 72°F
Usefil life 35 minutes after mixing Part A with Part B (ambient temperature of 60°F - 72°F)
Packaging Part A - 1 gal, pail | Part B - 0.5 gal, pail

COMPARISSON CHART

  SATIN STONE Epoxy Polyaspartic Polyurethane
UV Stable for outdoors YES NO YES YES
Resistance to Highly Alkaline Chemicals pH<2 YES NO YES YES
Resistance to Extremely Alkaline Chemicals pH>12 YES YES NO NO
Extreme Abrasion Resistance YES YES NO NO
Bond strength exceeds 400 PSI YES YES5 NO YES

DRYING TIMES

Drying times are affected by temperature and relative humidity. The chart represents guideline values but each project is to be treated individually. Below is the general time needed in between coats at a specified temperature.

CURING TIMES

Curing time is affected by temperature and relative humidity. The chart represents guideline values but each project is to be treated individually. For example, at only 50°F a full cure would take 10 days. In comparison, at 95°F it would only take 5 days to cure.

LABORATORY TEST RESULTS

Used automobile oil Excellent
Transmission fluid Good
Cooking oil Excellent
Alkali resistance Excellent
Hydrolic acid (10%) Good
Wine Excellent
Hydrolic acid (10%) Good

PRODUCT SHEET - SATIN STONE

TECH SHEET - SATIN STONE

PRODUCT DATA SHEET - SATIN STONE

SATIN STONE CHEMICAL RESISTANCE

SAFETY DATA SHEET - SATIN STONE

Ready to discuss your project?