SEALERS
Titan Shield Gloss
Engineered for professionals,
installed by anyone
The Titan Shield Gloss is an industrial-grade, water-based sealer for cementitious surfaces such as concrete, micro toppings, pavers, block, and/or polished concrete. This polyurethane-hybrid formula provides superior protection; outperforming acrylic, urethane, and polyurea sealers.
Want the specifics? It does this by drying as a high-density film that forms a topical membrane, preventing damage from all forms of foot, chemical and vehicle traffic as well as UV. The Titan Shield Gloss is easily applied with brush, roller or sprayer. Its fast-drying system and 3 coat application can be completed in a single day.
Features & Benefits
The Titan Shield Gloss is suitable for residential and commercial interior and exterior applications, including commercial and industrial vehicle traffic. Available in color finishes or with a non-skid additive, too.
RECOMMENDED FOR
Concrete
Masonry
Driveways and garages
Stamped concrete
Pool decks
Wet rooms
-
Outperforms epoxy, acrylic, and urethane sealers.
-
Applied with a sprayer, trowel, or roller. With its fast-drying system, a 3 coat application can be easily completed in a single day!
-
No maintenance needed, giving you peace of mind
-
Complete VOC compliance.
-
Titan Shield Gloss achieves slip resistance rating - DCOF 0.86
Application Instructions
Apply at temperatures from 50°F to 90°F.
Drying time: 20 minutes at 72°F.
Cure time : 48 hours at 72°F.
Airless sprayer
tip size 17, 600 PSI 3 coat minimum
Magic trowel
3 coats minimum
Roller
1/2″ nap, woven
3 coats minimum
-
HOW : Sweep debris off surface
PURPOSE : Ensures there is no debris in the sealer
HOW : Use The Titan Shield Gloss (for interior and exterior surfaces)
PURPOSE : Creates natural gloss finish for commercial floors and walls, kitchens, medical and industrial spaces
-
HOW : Use airless sprayer with tip size 17 at 600 PSI. Position the airless sprayer gun at 18” away from the floor
PURPOSE : Smaller tip size and high pressure can cause a lot overspray. Allows product to lay down evenly on the surface
HOW : OPTIONAL: use magic trowel to spread the product or roll product on with a 1/2″ nap roller. Do not go back and forth
PURPOSE : Allows product to lay down evenly on the surface
HOW : Minimum of 3 coats is required to ensure 6 - 8 mils film thickness in total
PURPOSE : Ensures long lasting surface protection from industrial and commercial vehicle and foot traffic
Specifications
COVERAGE
sq ft / gallon, 3 coats @ 6 - 8 mils total thickness
| Polished concrete | 150 - 200 |
| Stamped concrete | 200 - 300 |
| X-Bond Microcement | 200 - 250 |
| Artificial Stone | 150 - 200 |
| Masonry | 150 - 200 |
PRODUCT DETAILS
| Color | Milky white, dries clear |
| Chemical type | Polyurethane hybrid |
| Clean up | Water |
| Shelf life | 3 years in controlled environment (ambient temperature) of 60°F - 72°F |
| Packaging | 1 gal, pail | 5 gal, pail |
COMPARISSON CHART
| TITAN | Epoxy | Polyaspartic | Polyurethane | |
|---|---|---|---|---|
| UV Stable for outdoors | YES | NO | YES | YES |
| Resistance to Highly Alkaline Chemicals pH<2 | YES | NO | YES | YES |
| Resistance to Extremely Alkaline Chemicals pH>12 | YES | YES | NO | NO |
| Extreme Abrasion Resistance | YES | YES | NO | NO |
| Bond strength exceeds 400 PSI | YES | YE5 | NO | YES |
DRYING TIMES
Drying times are affected by temperature and relative humidity. The chart represents guideline values but each project is to be treated individually. Below is the general time needed in between coats at a specified temperature.
CURING TIMES
Curing time is affected by temperature and relative humidity. The chart represents guideline values but each project is to be treated individually. For example, at only 48°F a full cure would take 48 hours. In comparison, at 95°F it would only take 18 hours to cure.
LABORATORY TEST RESULTS
| Used automobile oil | Excellent |
| Transmission fluid | Good |
| Cooking oil | Excellent |
| Alkali resistance | Excellent |
| Hydrolic acid (10%) | Good |
| Wine | Excellent |
PRODUCT SHEET - TITAN SHIELD GLOSS
TECH SHEET - TITAN SHIELD GLOSS